Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1995-2000 Toyota Tacoma . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/YELLOW (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/RED (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/RED
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
RED/BLACK (-)
@ STEERING COLUMN HARNESS, WHITE Plug
PARKING
LIGHTS ( + )
GREEN (+)
@ BOTTOM of FUSEBOX
POWER LOCK
RED/WHITE (TYPE B)
IN DRIVERS KICK PANEL
POWER UNLOCK
RED/YELLOW (TYPE B)
IN DRIVERS KICK PANEL
DOOR TRIGGER
BLACK/WHITE (-)
@ TOP, REAR of FUSE BOX, 2-Pin Plug
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires Part #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN/RED (-)
@ STEERING COLUMN HARNESS
TACH
BLACK (AC)
@ IGNITER, See NOTE #1
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: the IGNITER, is located on the RIGHT side of the ENGINE COMPARTMENT for the
V-6, and on the LEFT side, for the 4-Cylinder.