Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1995-1998 Acura TL . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK/WHITE (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/YELLOW (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
RED/WHITE (-)
@ SECURITY MODULE, See NOTE #1
PARKING
LIGHTS ( + )
RED/BLACK (+)
@ FUSE BOX, in DRIVERS KICK or @ DIMMER CONTROL
POWER LOCK
GRAY (TYPE B)
@ PASSENGER DOOR HARNESS
POWER UNLOCK
GREEN/YELLOW (TYPE B)
@ PASSENGER DOOR HARNESS
DOOR TRIGGER
BLACK/WHITE (-)
in PLUG @ INSTRUMENT CLUSTER
DOMELIGHT
SUPERVISION
Use Door Trigger, (Requires #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLUE/RED (-)
@ SECURITY MODULE, See NOTE #1
TACH
BLUE (AC)
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
in DRIVERS KICK PANEL
FACTORY
ALARM DISARM
DISARMS with UNLOCK
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: The SECURITY MODULE is located high on the Passenger side of the dash, behind the
Glove Box and the ABS control module. Locate the wire harness as it drops
down from this module.