NOTE #1: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for
REMOTE STARTING!!!!!!
NOTE #2: If vehicle is EQUIPPED with FACTORY KEYLESS ENTRY it is a TYPE "A" door locking
system, if vehicle is without FACTORY KEYLESS it is a TYPE "C" door locking
system.The KEYLESS ENTRY MODULE is mounted to the UNDER DASH PANEL
on the driver side of the vehicle.
NOTE #3: Use the WHITE (-) wire at a Pin switch or Courtsey light if Non-Keyless, use the same
wire for DOMELIGHT SUPERVISION on this vehicle, and on Keyless Entry vehicles use
the BLACK (-) wire in the BLUE plug at the KEYLESS ENTRY MODULE located under the
drivers dash panel on the drivers side of vehicle. For DOMELIGHT SUPERVISION use
the WHITE (-) wire in the BLACK plug.
|