PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	PURPLE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	IGNITION SWITCH HARNESS
IGNITION 2	PINK/WHITE (+) or WHITE (+) See NOTE *1	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH or in DRIVERS KICK PANEL
POWER LOCK	LIGHT BLUE (5 Wire Reverse Polarity) See NOTE *2	IN DRIVERS KICK PANEL
POWER UNLOCK	WHITE (5 Wire Reverse Polarity) See NOTE *2	IN DRIVERS KICK PANEL
DOOR TRIGGER	WHITE (-) or BLACK (-) See NOTE *3
DOMELIGHT SUPERVISION	USE DOOR TRIGGER Requires Part #R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLACK (-)	@ STEERING COLUMN HARNESS
TACH	WHITE	@ IGNITION COIL
WAIT TO START LIGHT	N/A
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!! NOTE *2 If vehicle is EQUIPPED with FACTORY KEYLESS ENTRY it is a TYPE "A" door locking system, if vehicle is without FACTORY KEYLESS it is a TYPE "C" door locking system.The KEYLESS ENTRY MODULE is mounted to the UNDER DASH PANEL on the driver side of the vehicle. NOTE *3 Use the WHITE (-) wire at a Pin switch or Courtsey light if Non-Keyless, use the same wire for DOMELIGHT SUPERVISION on this vehicle, and on Keyless Entry vehicles use the BLACK (-) wire in the BLUE plug at the KEYLESS ENTRY MODULE located under the drivers dash panel on the drivers side of vehicle. For DOMELIGHT SUPERVISION use the WHITE (-) wire in the BLACK plug.