| NOTE *1 THIS VEHICLE USES GROUNDS AT THE IGNITION SWITCH TO TURN ON RELAY AND MODULES.TO INTERFACE WITH THE NEGATIVE IGNITION WIRE TO REMOTE START SEE DIAGRAM
FOR WIRING INFORMATION . THIS VEHICLE USES LOW CURRENT , LOW VOLTAGE SWITCHING IN MANY PLACES IN THE ELECTRICAL SYSTEM . TEST WIRING WITH A DIGITAL (Volt Ohm Meter) . DO NOT USE A TEST LIGHT!!!
NOTE *2 the PURPLE/RED (-) is for the DRIVERS DOOR in the Drivers Kick Panel and the PURPLE (-) is for the PASSENGER DOOR and is in the PASSENGER KICK PANEL, when connecting to an ALARM SYSTEM, use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM,
NOTE *3 this vehicle uses a 5-Wire TRUCK RELEASE SYSTEM that will require an extra Relay part #775, to connect, See DIAGRAM.