NOTE #1: When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2
wires. Both wires must be connected to the STARTER/CRANKING Output wire from the
Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE #2: the PARKING LIGHT Cirucit on this vehicle has 2 wires, you must use both and that
will require 2 extra relays part #775, to connect, See DIAGRAM.
NOTE *3 MAY REQUIRE DOUBLE PULSE TO UNLOCK ON SOME MODELS . ALSO THERE IS A
SINGLE WIRE IN THE DRIVERS DOOR HARNESS THAT TOGGLES FROM (+) TO (-) THAT
CAN BE CONTROLLED BY EXTRA RELAYS - DOES NOT NEED TO HAVE THE 3.5 SECOND
REQUIREDMENT, BUT ALSO WILL NOT ARM OR DISARM FACTORY SECURITY.
|