PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	YELLOW (+) or PURPLE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	IGNITION SWITCH HARNESS
IGNITION 2	PINK/WHITE (+) or WHITE (+) See NOTE *5	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH or FUSE PANEL
POWER LOCK	LIGHT BLUE (5 Wire Reverse Polarity)	IN EITHER DOOR BOOT
POWER UNLOCK	WHITE (5 Wire Reverse Polarity) See NOTE *1	IN EITHER DOOR BOOT
DOOR TRIGGER	PURPLE (-)	@ HEAD LIGHT SWITCH
DOMELIGHT SUPERVISION	USE DOOR TRIGGER, Requires Part#R30-H Relay
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLACK (-)	@ STEERING COLUMN HARNESS
TACH	WHITE See NOTE *3	@ ECM, See NOTE *2
WAIT TO START LIGHT	DARK BLUE (+) See NOTE *4
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 if vehicle is a 2-Door it is a 5 Wire Reverse Polarity door lock system, if vehicle is a 4-Door or if it has a FACOTRY KEYLESS ENTRY System it is a Positive (+) door lock system. NOTE *2 the ECM is located behind the Glove Box. NOTE *3 THE DIESEL TACH wire is also a WHITE but at the Instrument Cluster. NOTE *4 when hooking up a remote starter, if you cannot get the (+) or (-) Wait to Start wire on the Remote Starter to work properly, you will then need to disconnect this wire and Program the Remote Starter for the 5, 10, 15 or 20 Second Wait to Start Timmer in the Installation manual. NOTE *5 IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!!