PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	PURPLE (+) or YELLOW (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	IGNITION SWITCH HARNESS
IGNITION 2	PINK/WHITE (+) or WHITE (+) See NOTE *4	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH or in DRIVERS KICK PANEL
POWER LOCK	LIGHT BLUE (TYPE A)	IN EITHER DOOR HARNESS
POWER UNLOCK	WHITE (TYPE A)	IN EITHER DOOR HARNESS
DOOR TRIGGER	PURPLE (-)	@ HEADLIGHT SWITCH
DOMELIGHT SUPERVISION	WHITE (-), Requires #775 Relay	@ HEADLIGHT SWITCH
TRUNK RELEASE	BLACK (+), Requires #775 Relay	@ HATCH RELEASE SWITCH
SLIDING POWER DOOR	N/A
HORN	BLACK (-)	@ STEERING COLUMN HARNESS
TACH	PURPLE/WHITE, See NOTE *2	@ ECM, See NOTE *1
WAIT TO START LIGHT	See NOTE *3
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 The ECM (Electronic Control Module) is located BEHIND the GLOVEBOX, and to the right. NOTE *2 For DIESEL TACH wire use the WHITE wire at the ALTERNATOR or INSTRUMENT CLUSTER NOTE *3 when hooking up a REMOTE STARTER on a DIESEL, you will need to program in the 5,10 or 15 Second WAIT to START TIMMER in the Installation Manual. On some vehicles the Wait to Start Light on the dash is not a true (+)Positive or (-)Negative and the wire from the Remote Starter will not work. NOTE *4 IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!!