Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1994-1996 Dodge Viper Rt/10 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
@ IGNITION SWITCH HARNESS
STARTER
YELLOW (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
DARK BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
ORANGE (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
BLACK/YELLOW (+)
@ HEADLIGHT SWITCH
POWER LOCK
See NOTE #1
ADD ACTUATOR See DIAGRAM
POWER UNLOCK
See NOTE #1
ADD ACTUATOR See DIAGRAM
DOOR TRIGGER
YELLOW (-)
@ HEADLIGHT SWITCH
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires Part #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLACK (-)
@ STEERING COLUMN HARNESS
TACH
GRAY/LIGHT BLUE (AC)
@ PCM
WAIT TO
START LIGHT
N/A
BRAKE
WHITE/TAN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
LIGHT GREEN/ORANGE (-)
@ FACTORY SECURITY MODULE See NOTE *2
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: to add KEYLESS ENTRY to this vehicle DOOR LOCK ACTUATOR motors must be
added, See DIAGRAMS
NOTE #2: the FACTORY SECURITY MODULE is located on the DRIVERS SIDE transmission
tunnel.