NOTE *1 the IGNITION HARNESS is accessible at the BOTTOM of the FUSE BOX, pull the fuse box up into the cowling area to get at the wire harness. NOTE: use the PURPLE/GREEN (+) wire to bypass the Factory Starter Kill for Remote Starter Installation.
NOTE *2 this vehicle has 2 Parking Light wires, it will require 2 extra Relays part #775 to connect, See DIAGRAM.
NOTE *3 the front doors are a BROWN/GRAY at the PASSENGER PIN SWITCH and the rear doors are a BROWN/GRAY/BLACK (-) at the rear pin switch. When connecting to an ALARM SYSTEM, use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM
NOTE *4 the tach wire is at the 3-pin connector at the Instrument cluster or in the main harness left of the steering column.
NOTE *5 this vehicle uses a Vacuum Door Locking System that will require 2 extra relays part #775, to connect, See DIAGRAM
|