Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1994- Audi 100 Cabriolet . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
@ BOTTOM of FUSEBOX
STARTER
RED/BLACK (+)
@ BOTTOM of FUSEBOX
STARTER
2
N/A
IGNITION
1
BLACK (+)
@ BOTTOM of FUSEBOX
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/YELLOW (+)
@ BOTTOM of FUSEBOX
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
GRAY/BLACK (+) and GRAY/RED (+) Use both, See NOTE #1
@ BOTTOM OF FUSE BOX
POWER LOCK
BROWN/WHITE (TYPE B)
@ DRIVERS DOOR HARNESS or See NOTE #2
POWER UNLOCK
BROWN/BLUE (TYPE B)
@ DRIVERS DOOR HARNESS or See NOTE #2
DOOR TRIGGER
BROWN/BLUE (-)
@ ANY DOOR PIN SWITCH
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires #775 relay for DOMELIGHT SUPERVISION)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
N/A
TACH
YELLOW/BLUE, YELLOW/RED or YELLOW/WHITE (AC)
IN WIRE LOOM @ COIL PACK
WAIT TO
START LIGHT
N/A
BRAKE
RED/BLACK (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
DISARMS WITH UNLOCK
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: this vehicle has 2 Parking Light wires, you will need to use both, this will require
(2) extra relays, See DIAGRAM
NOTE #2: these wires can also be found at the PUMP under BACK SEAT.