Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1993-1994 Volkswagen Corrado . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
IGNITION SWITCH HARNESS
STARTER
RED/BLACK (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
GRAY/GREEN (+)
@ HEADLIGHT SWITCH
POWER LOCK
RED/YELLOW (TYPE A) (Key Switch wire)
IN DRIVERS KICK PANEL
POWER UNLOCK
RED/BLACK (TYPE A) (Key Switch wire)
IN DRIVERS KICK PANEL
DOOR TRIGGER
BROWN/WHITE (-)
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, Requires Part #775 Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BROWN/BLACK (-)
@ FUSEBOX/RELAY, See NOTE *1
TACH
GREEN
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
BLACK/RED (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
DISARMS WITH UNLOCK
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 Other side of HORN (IGNITION HOT) is open when the ignition key is off. Use (2) relays for HORN HONK or rewire BLACK/YELLOW HORN (+) Positive wire to constant voltage.