Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1993 - Chrysler Lhs . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
PINK/BLACK (+)
IGNITION SWITCH HARNESS
STARTER
YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
DARK BLUE (+)
IGNITION SWITCH HARNESS
IGNITION
2
RED/WHITE (+)
IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/ORANGE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
BLACK/YELLOW (+)
IN DRIVERS KICK PANEL
POWER LOCK
ORANGE/WHITE (Positive (+))
@ RELAYS, BACK of FUSEBOX
POWER UNLOCK
PINK/VIOLET (Positive (+))
@ RELAYS, BACK of FUSEBOX
DOOR TRIGGER
TAN (-) and TAN/RED (-) use both, See NOTE *1
IN DRIVERS KICK PANEL, See DIAGRAM
DOMELIGHT
SUPERVISION
TAN (-), Requires #R30-H Relay
IN DRIVERS KICK PANEL
TRUNK RELEASE
BLACK/WHITE (+), Requires #R30-H Relay
@ TRUNK RELEASE SWITCH
SLIDING
POWER DOOR
N/A
HORN
BLACK/RED (-)
@ RELAY in FUSEBOX
TACH
GRAY
@ IGNITION COIL PACK
WAIT TO
START LIGHT
N/A
BRAKE
WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
LIGHT GREEN/ORANGE (-)
IN EITHER KICK PANEL
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 When connecting an ALARM SYSTEM, the TAN (-) is for the DRIVERS SIDE and the TAN/RED (-) is for the PASSENGERS SIDE, both wires are in the DRIVERS KICK PANEL, use both wires and DIODE ISOLATE. See DIAGRAM
