Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1992-1994 Ford Explorer . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
YELLOW (+)
@ IGNITION SWITCH HARNESS
STARTER
RED/LIGHT BLUE (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
RED/LIGHT GREEN (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/GREEN (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
GRAY/YELLOW (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
BROWN (+)
@ HEADLIGHT SWITCH or in FUSE BOX
POWER LOCK
PINK/YELLOW (TYPE C), See NOTE #1
IN DRIVERS KICK PANEL
POWER UNLOCK
PINK/LIGHT GREEN (TYPE C), See NOTE #1
IN DRIVERS KICK PANEL
DOOR TRIGGER
BLACK/LIGHT BLUE (+)
@ UNDER DASH LIGHT
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
YELLOW/LIGHT GREEN (-)
@ STEERING COLUMN HARNESS
TACH
GRAY/ORANGE (AC)
@ ECM, in the PASSENGER KICK PANEL
WAIT TO
START LIGHT
N/A
BRAKE
LIGHT GREEN (+)
SWITCH ON BRAKE PEDAL BRACKET
FACTORY
ALARM DISARM
DARK GREEN/PURPLE (-)
IN DRIVERS KICK PANEL
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: Vehicles with KEYLESS ENTRY are TYPE B, Vehicles without KEYLESS ENTRY are TYPE C.
Vehicles with the KEY PAD on the Door are considered to have KEYLESS ENTRY.