Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1991 - Mazda Mpv . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
BLACK (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/RED (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
ORANGE (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
RED/BLACK (+) or RED/WHITE (+)
@ FUSEBOX
POWER LOCK
GREEN/BLACK (TYPE F) See NOTE *1
IN DRIVERS KICK PANEL
POWER UNLOCK
Same wire, See DIAGRAM
See DIAGRAMS
DOOR TRIGGER
PINK (-)
IN EITHER KICK PANEL or UNDER DASH LIGHT
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN/ORANGE (-)
@ STEERING COLUMN HARNESS
TACH
WHITE or WHITE/BLACK
@ TEST CONNECTOR, LEFT FRONT FENDER
WAIT TO
START LIGHT
N/A
BRAKE
WHITE/GREEN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 THIS VEHICLES DOOR LOCKS ARE A TYPE F DOOR LOCKING SYSTEM AND WILL REQUIRE AN EXTRA RELAY PART #R30-H TO CONNECT, See DIAGRAM
