Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1990-1995 Toyota 4-Runner . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+) and WHITE/RED (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/YELLOW (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/YELLOW (+) or BLACK/RED (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/RED (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
RED/BLACK (-)
@ STEERING COLUMN HARNESS
PARKING
LIGHTS ( + )
GREEN (+)
IN DRIVERS KICK PANEL
POWER LOCK
BLUE/WHITE (TYPE B)
DOOR CONTROL RELAY, See NOTE #1
POWER UNLOCK
BLUE/YELLOW (TYPE B)
DOOR CONTROL RELAY, See NOTE #1
DOOR TRIGGER
BLACK/WHITE (-) or BLACK (-)
@ 2-PIN CONNECTOR, IN FUSEBOX
DOMELIGHT
SUPERVISION
Use DOOR TIRGGER, (Requires Part #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN/RED (-)
@ STEERING COLUMN HARNESS
TACH
BLACK (AC)
@ COIL PACK, See NOTES #2
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: DOOR CONTROL RELAY, IS LOCTATED BEHIND THE DRIVERS DASH SPEAKER
NOTE #2: THIS WIRE IS ALSO A BLACK/WHITE AT PIN 1G IN THE DIAGNOSIS CONNECTOR,
UNDER THE HOOD.