Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1990-1995 Suzuki Sidekick . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/GREEN (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/RED (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/BLUE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW/BLACK (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
RED/YELLOW (+)
@ HEADLIGHT SWITCH
POWER LOCK
PINK (TYPE B)
IN DRIVERS KICK PANEL
POWER UNLOCK
PINK/BLACK (TYPE B)
IN DRIVERS KICK PANEL
DOOR TRIGGER
See NOTE *1
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLUE/GREEN (-)
@ STEERING COLUMN HARNESS
TACH
BROWN/WHITE
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 the 4-Door vehicle has a BLACK/RED (-) in a WHITE 22-Pin Plug behind the drivers front speaker. On the 2-Door use the BROWN (-) wire behind the Drivers Rear speaker by the seat belt retractor. For DOMELIGHT SUPERVISION use the same wires.