Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1990-1994 Suzuki Swift . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
GREEN (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/BLUE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
YELLOW/BLACK (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
RED/YELLOW (+) or BLUE (+)
@ FUSEBOX or HEADLIGHT SWITCH
POWER LOCK
ADD ACTUATOR, See NOTE *1
TO ALL DOORS, See DIAGRAM
POWER UNLOCK
ADD ACTUATOR, See NOTE *1
TO ALL DOORS, See DIAGRAM
DOOR TRIGGER
BLACK/YELLOW (-)
See NOTE *2
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN (-) or BLUE/GREEN (-)
@ STEERING COLUMN HARNESS
TACH
BROWN
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 to do KEYLESS ENTRY on this vehicle will require the adding of DOOR LOCK ACTUATORS PART #742, to each Door, to connect, See DIAGRAM
NOTE *2 Located behind the RIGHT SIDE DASH near grommet.