Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1990-1993 Toyota Celica . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+) or BLACK RED (+)
@ IGNITION SWITCH HARNESS
STARTER
BLACK/WHITE (+)
@ IGNITION SWITCH HARNESS
STARTER
2
IGNITION
1
BLUE/RED (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/ORANGE (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
GRAY (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
LIGHT GREEN (-)
@ STEERING COLUMN HARNESS
PARKING
LIGHTS ( + )
DARK GREEN (+)
IN DRIVERS KICK PANEL
POWER LOCK
BLUE/BLACK (TYPE B)
IN DRIVERS KICK PANEL
POWER UNLOCK
BLUE and GREEN (TYPE B) Use both, See NOTE #1
IN DRIVERS KICK PANEL
DOOR TRIGGER
RED/WHITE (-)
@ FUSEBOX
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires Part #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN (-)
@ STEERING COLUMN HARNESS
TACH
BLACK or WHITE/BLUE (AC)
@ CHECK CONNECTOR, See NOTE #2
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: WHEN CONNECTING FOR UNLOCK, YOU MUST USE BOTH WIRES AND
DIODE ISOLATE, to connect, See DIAGRAM
NOTE #2: THE CHECK CONNECTOR IS LOCATED BEHIND THE DRIVERS STRUT TOWER