Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1990-1993 Dodge Daytona . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
@ IGNITION SWITCH HARNESS
STARTER
YELLOW (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
DARK BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
BLACK/WHITE (+)
@ IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/ORANGE (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
PINK/DARK BLUE (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
BLACK/YELLOW (+)
LOW in DRIVERS KICK PANEL
POWER LOCK
ORANGE/VIOLET, See NOTE #1
IN DRIVERS KICK PANEL
POWER UNLOCK
PINK/VIOLET, See NOTE #1
IN DRIVERS KICK PANEL
DOOR TRIGGER
YELLOW (-)
@ DOOR PIN SWITCH
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires #775 Relay)
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
DARK GREEN/RED (-)
@ RELAY BOTTON of FUSE BOX
TACH
BLACK/GRAY (AC)
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
WHITE/TAN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
LIGHT GREEN/ORANGE (-)
IN DRIVERS KICK PANEL
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1: some vehicles are a TYPE B Door Locking System and while other vehicles are
a TYPE C Door Locking System, you MUST TEST to identify the type of Door
Locking System per vehicle.