Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1989 - Toyota Van . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE/GREEN (+) and WHITE/RED (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
IGNITION
2
BLACK/RED (+)
IGNITION SWITCH HARNESS
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/BLACK (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN/BLUE (-)
@ STEERING COLUMN HARNESS
PARKING
LIGHTS ( + )
GREEN (+)
@ DIMMER SWITCH on DASH
POWER LOCK
BLUE/RED (5 Wire Reverse Polarity) See NOTE *1
IN DRIVERS KICK PANEL
POWER UNLOCK
BLUE/BLACK (5 Wire Reverse Polarity) See NOTE *1
IN DRIVERS KICK PANEL
DOOR TRIGGER
RED/BLUE (-)
@ DASH INDICATOR
DOMELIGHT
SUPERVISION
RED/WHITE (-), Requires Part #R30-H Relay
@ PASSENGER PIN SWITCH
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
GREEN/RED (-)
@ STEERING COLUMN HARNESS
TACH
BLACK/WHITE
@ DISTRIBUTOR
WAIT TO
START LIGHT
N/A
BRAKE
GREEN/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL or in DRIVERS KICK PANEL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 the DOOR LOCKS on this vehicle use a REVERSE-POLARITY REST at NEUTRAL System that will require (4) extra relays, part #R30-H, to connect, See DAIGRAM
