PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/YELLOW (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	GREEN (+)	IGNITION SWITCH HARNESS
IGNITION 2	PURPLE (+)	IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	N/A
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	GRAY/WHITE (+) and GRAY/YELLOW (+) Use both wires, See NOTE *1	@ HEADLIGHT SWITCH See DIAGRAM
POWER LOCK	YELLOW/BLUE (Negative (-))	IN DRIVER KICK PANEL See NOTE *2
POWER UNLOCK	GREEN/BLUE (Negative (-))	IN DRIVER KICK PANEL See NOTE *2
DOOR TRIGGER	BROWN/PURPLE (-)	IN DRIVER KICK PANEL
DOMELIGHT SUPERVISION	USE DOOR TRIGGER
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BROWN/YELLOW (-)	@ STEERING COLUMN HARNESS
TACH	BLACK	@ DIAGNSTIC CONNECTOR
WAIT TO START LIGHT	N/A
BRAKE	GREEN/RED (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

EXTRA INFORMATION

NOTE *1 this vehicle has a DUAL PARKING LIGHT System that will require 2 extra Relays Part #R30-H to connect, See DIAGRAM NOTE *2 REMOVE DRIVER KICK PANEL SPEAKER, REMOVE THE TWO SCREWS TO PULL RELAYS. KEEP RELAY UPRIGHT SO THEY DON'T FILL WITH WATERLATER. THESE WIRES DON'T SHOW PULSE .RATHER , ONE WILL REST (-) AND THE OTHER WILL REST(+).REVERSING THE STATE OF THE LOCKS FLIP-FLOPS THE POLARITY OF THESE TWO WIRES. PUTTING A LOW CURRENT (-)TO THE (+)WIRE WILL OPERATE THE LOCKS . DO NOT OPERATE THE DOOR LOCKS WITH THE REMOTE IF YOU HAVE LOCKED THE VEHICLE WITH THE KEY IN THE DOOR KEY CYLINDER, DOING SO WILL DO DAMAGE TO THE DOOR LOCKING SYSTEM!!!!!