Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1987-1988 Mitsubishi Montero . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
WHITE (+)
IGNITION SWITCH HARNESS
STARTER
BLACK/YELLOW (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLUE/WHITE (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN/WHITE (-)
@ HEADLIGHT SWITCH
PARKING
LIGHTS ( + )
RED/GREEN (+) or GREEN/BLACK (+)
IN DRIVERS KICK PANEL or FUSEBOX
POWER LOCK
ADD ACTUATORS, See NOTE *1
TO ALL DOORS See DIAGRAM
POWER UNLOCK
ADD ACTUATORS, See NOTE *1
TO ALL DOORS See DIAGRAM
DOOR TRIGGER
RED/GREEN (-)
@ EITHER DOOR PIN SWITCH
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, Requires Part #775 Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
BLACK (-)
@ STEERING COLUMN HARNESS
TACH
BLACK
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
GREEN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 this vehicle does not come with FACTORY POWER DOOR LOCKS, if you want to add KEYLESS ENTRY to the vehicle the door lock motors will need to be added to each door part #742 Actuator, to connect, See DAGRAMS.