Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1987-1988 Chrysler New Yorker . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+) and PINK (+)
@ IGNITION SWITCH HARNESS
STARTER
YELLOW (+)
@ IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
DARK BLUE (+)
@ IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/ORANGE (+)
@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
BLACK/YELLOW (+)
IN DRIVERS KICK PANEL
POWER LOCK
ORANGE/WHITE (TYPE A), See NOTE #1
@ BCM, See NOTE #2
POWER UNLOCK
PINK (TYPE C), See NOTE #1
IN DRIVERS KICK PANEL
DOOR TRIGGER
YELLOW (-)
IN DRIVERS KICK PANEL
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, (Requires #775 Relay)
TRUNK RELEASE
BLACK/WHITE (+)
@ TRUNK RELEASE SWITCH
SLIDING
POWER DOOR
N/A
HORN
BLACK/RED (-)
@ RELAY in FUSEBOX
TACH
GRAY (AC)
@ DISTRIBUTOR
WAIT TO
START LIGHT
N/A
BRAKE
WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE #1 This vehicle uses a 3/5 Wire Door Locking System, the LOCK wire is a TYPE A and the
UNLOCK wire is a TYPE C. to connect, See DIAGRAM.
NOTE #2: the BCM is located in the PASSENGER KICK PANEL