Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1987 -1988 Audi 5000 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
RED (+)
IGNITION SWITCH HARNESS
STARTER
RED/BLACK (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLACK (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
N/A
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
GRAY/BLACK/VIOLET (+)
@ HEADLIGHT SWITCH
POWER LOCK
ADD ACTUATOR, See NOTE *1
TO DRIVERS DOOR ONLY, See DIAGRAM
POWER UNLOCK
ADD ACTUATOR, See NOTE *1
TO DRIVERS DOOR ONLY, See DIAGRAM
DOOR TRIGGER
BROWN/BLUE/WHITE (-)
@ DOOR PIN SWITCH
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
N/A
TACH
N/A
WAIT TO
START LIGHT
N/A
BRAKE
N/A
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 this vehicle is equipped with a CENTRAL DOOR LOCKING SYSTEM that requires the adding of a DOOR LOCK ACTUATOR part #742 to the DRIVERS DOOR ONLY to operate as a KEYLESS ENTRY SYSTEM, See DIAGRAM.
